Login
Analysis Values for the inoculum: Shallalah Sludge 1 provided by Wadi Shallalah Wastewater Treatment Plant (at Irbid-Jordan)
| inoculumvaluesID | test | date | institute | TS | TSStd (optional) | VS | VSStd (optional) | Methane (optional) | Methane Std (optional) | Methane Volume (optional) | Methane Volume Std (optional) | Biogas Volume (optional) | Biogas Volume Std (optional) | H2S (optional) | H2SStd (optional) | CO2 (optional) | CO2Std (optional) |
| 27 | climate room | 2017-09-01 | GJU | 1.9 | 0.1 | 72.88 | 0.73 | | | na | na | | | | | | |
Annotations:
- TS denotes the total solids (mean) and TSStd is the standard deviation of the measured total solids.
- VS denotes the volatile solids (mean) and VSStd is the standard deviation of the measured volatile solids.
- ME denotes the measured percentage of methane gas (mean) and MEStd is the standard deviation of the measured percentage of methane gas.
- H2S denotes the percentage of hydrogen sulfide (mean) and H2SStd is the standard deviation of the measured percentage of hydrogen sulfide. This value is only measured in the climate room. For the Automatomatic Methane Potential Test System (AMPTS) na specifies the value non applicable.
- CO2 denotes the percentage of carbon dioxide (mean) and CO2Std is the standard deviation of the measured percentage of carbon dioxide. This value is only measured in the climate room. For the Automatomatic Methane Potential Test System (AMPTS) na specifies the value non applicable.
- For more information on references and innocula used, please check the respective pages.
- For technical reasons the results are grouped by the test type.
Back to Inventory Main Page
